BDJQZ - SCOTCH-SEAL BRAND INDUSTRIAL SEALANT 612

Product Identification

Product ID:SCOTCH-SEAL BRAND INDUSTRIAL SEALANT 612
MSDS Date:03/09/1987
FSC:8030
NIIN:00-209-8010
MSDS Number: BDJQZ

Responsible Party
3M COMPANY, ADHESIVE,COATINGS & SEALERS
3M CENTER
ST. PAUL, MN 55144-1000

Emergency Phone: (612)733-1110

Info Phone: (612)733-1110

Cage: 04963

Contractor
MINNESOTA MINING AND MFG CO, DBA 3M
SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 30-40%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 1-10%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293


THIAZOLE PEPTIZING AGENT

Fraction By Weight: 1-10%

OSHA PEL N/K

ACGIH TLV: N/K


POLYSULFIDE RUBBER

Fraction By Weight: 50-60%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY CAUSE IRRITATION ON DIRECT
CONTACT. SKIN:MAY CAUSE IRRITATION. INHALATION:NO ADVERSE HEALTH
EFFECTS ARE EXPECTED. INGESTION:MAY CAUSE DIGESTIVE SYSTEM
IRRITATION.
Explanation of Carcinogenicity:NOT APPLICABLE
Effects of Overexposure:SEE HEALTH HAZARD DATA .
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYE:IMME FLUSH W/LGE AMTS OF WTR FOR AT LEAST 15 MIN .CALL A
PHYSICIAN. SKIN:WASH AFFECTED AREA W/SOAP & WTR. INHALATION:REMOVE
FROM EXPOSURE. SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION)
. INGESTION:CALL MD IMMEDIATELY .

Fire Fighting

Lower Limits:N/APPLICABLE
Upper Limits:N/APPLICABLE
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:NOT APPLICABLE (SOLID)
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:AVOID EYE & PRLONGD SKIN CONTACT,WEAR
SAFETY GLASSES & IMPERVIOUS GLOVES WHN HNDLNG PRODUCT.DO NOT TAKE
INTERNALLY.KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID EYE & PROLONGED SKIN CONTACT.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:MECHANICAL VENTILATION RECOMMENDED,
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:N/K .
Work Hygienic Practices:N/K
Supplemental Safety and Health
RTE ENTRY:

Chemical Properties

HCC:T4
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/APPLICAB
Vapor Density:N/APPLICAB
Spec Gravity:1.46
pH:N/APPL
Solubility in Water:VERY SLIGHT
Appearance and Odor:BLACK PUTTY, STRONG SULFIDE ODOR
Percent Volatiles by Volume:0
Corrosion Rate:

Stability

Stability Indicator/Materials to Avoid:YES
N/APPLICABLE.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CO, CO*2, SO*2, & SMOKE PARTICLES WHEN
EXPOS TO HEAT OR FLAM

Disposal

Waste Disposal Methods:NOT A HAZARDOUS WASTE (E.P.A.). MAY BE PLACED IN
A SANITARY LANDFILL IF LOCAL REGULATIONS PERMIT. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.